• Doing the right thing is prosperous for everyone.

car parts

Scrapping Cars and Car Parts in Dallas, TX - Encore Recyclers in Garland, TX

Scrapping Cars and Car Parts in Dallas

Do you have an old car you no longer need? Have you had work done to your car that’s left some disused parts lying around? Getting rid of a scrap car or auto parts can be easy, and net you a bit of cash to boot, if you take them to a professional recycling center like Encore Recyclers.

In addition to taking junk off your hands and getting you paid for it, recycling cars and car parts is also great for the environment. Many car parts contain rare metals, and these metals can often be recovered almost completely—which reduces the environmental impact of mining and keeps the overall supply of these metals higher.

However, getting the best value for your car scrap takes a little bit of time and expertise.

What Scrap Yards Pay For

Your car is made up of a wide variety of components that are themselves composed of a variety of metals and other scrap-friendly materials. The majority of your car’s weight comes from steel, and there is a large amount of other, lighter metals as well (such as tin). The rarer (and therefore more valuable) metals are often used in the moving or otherwise functional parts of your car.

If you scrap your entire car, the price at most scrapyards will be based on weight. A scrapyard feels safe betting on your steel, but doesn’t have the time and labor available to fully inspect your car for other metals. If you want the most value for your car, you’ll have to dismantle it.

This is generally true of all appliances and machines that can be scrapped. However, dismantling a car is much more difficult than taking apart a washer or dryer or even a computer.

Read more
How to Recycle Your Scrap Metal for the Best Price - Dallas, TX

Getting Ready to Recycle Your Scrap Metal

After you’ve finished a demolition or other project, you may wish to recycle your scrap metal. Scrap metal is not biodegradable, so it’s ideal for recycling. And while Encore Recyclers will buy your metal when mixed together, you may be able to achieve a better price for your scrap by separating out your scrap metals and doing a little prep work, such as removing plastic, rubber, or other contaminants. Read on to learn how to best separate and prep your scrap materials.

Clean your scrap metal

First, remove any contaminants, such as dirt, plastic, rubber, or other metals. The consumer mills that we sell to in bulk will only take clean, uncontaminated scrap metal that they can put directly into their furnaces. If we receive scrap that is free of contaminants, we are better able to pass the labor savings onto you.

For cars and other vehicles

Most scrap companies, including Encore Recyclers, will accept entire battery assemblies and entire catalytic converters. Electric motor parts can also be recycled. The field windings (parts with copper wire wound around) should be separated out from the iron and steel for the best price (armatures are very difficult to separate and might need to be chiseled out). The same goes for starters and alternators. Copper or brass radiators from older cars are valuable for scrap; you can identify copper by its bluish-green patina or by scraping the flanges of the radiator and looking for the reddish hue characteristic of copper. Aluminum radiators common in newer cars are not as valuable as coppers ones, but are still worth recycling. Heater cores are brass or aluminum radiators that can be recycled as scrap metal. With all of these parts, you can maximize the value of your scrap by removing pieces of plastic, insulation, and extraneous metals.

Separate ferrous from non-ferrous metals

Iron, steel and other ferrous metals are magnetic. For smaller pieces of metal, you may even be able to lift them out of piles of scrap metal with a large magnet.

Separate non-magnetic, stainless steel

Stainless steel is alloy containing chromium. It has a dull shine and is heavier than chrome- or nickel-plated steel. Sometimes, it may be slightly magnetic. If you do find stainless steel that’s magnetic, you should add it to your ferrous metals.

Read more